Scan performed on 4/25/2017, Computer: Sony VGN-FE41ZR - Windows 7 64 bit
It should be noted that VAG-COM 409.1 KKL cable does not work on vehicles running on CAN-BUS System. Cable must be plugged into the vehicle with ignition ON. Test the cable with each COM Port from 1 to 4 in Windows Device Manager. Make sure that the driver is installed and configured as explained in Step 1. Kkl Vag Com 409.1 may sometimes be at fault for other drivers ceasing to function These are the driver scans of 2 of our recent wiki members* *Scans were performed on computers suffering from Kkl Vag Com 409.1 disfunctions.
Outdated or Corrupted drivers:4/20
Device/Driver | Status | Status Description | Updated By Scanner |
Motherboards | |||
Intel(R) 6311ESB/6321ESB PCI Express Downstream Port E3 - 3518 | Corrupted By Kkl Vag Com 409.1 | ||
Mice And Touchpads | |||
ELAN Samsung PS/2 Port Input Device | Up To Date and Functioning | ||
Logitech Logitech Gaming Virtual Mouse | Up To Date and Functioning | ||
Usb Devices | |||
Intel(R) Q75 Express Chipset LPC Controller - 1E48 | Up To Date and Functioning | ||
Hewlett-Packard HP PSC 1100 Series (DOT4USB) | Up To Date and Functioning | ||
Sierra Wireless Sierra Wireless TRU-Install | Corrupted By Kkl Vag Com 409.1 | ||
Sound Cards And Media Devices | |||
ViXS ViXS PureTV-U ISDB-T Tuner | Up To Date and Functioning | ||
Realtek High Definition Audio-apparaat | Up To Date and Functioning | ||
Realtek Periferica audio su bus High Definition Audio | Up To Date and Functioning | ||
Network Cards | |||
Ericsson N5321 gw Mobile Broadband Driver | Up To Date and Functioning | ||
Keyboards | |||
Microsoft Keyboard Device Filter | Up To Date and Functioning | ||
Hard Disk Controller | |||
Ricoh Ricoh Memory Stick Bus Host Adapter | Outdated | ||
Others | |||
Intel Intel(r) AIM External TV Encoder Driver 5 | Outdated | ||
Hewlett-Packard psc 1200 (DOT4) | Up To Date and Functioning | ||
Cameras, Webcams And Scanners | |||
Canon Canon MG5300 series | Up To Date and Functioning | ||
Video Cards | |||
ATI ATI Technologies, Inc. 3D RAGE PRO AGP 2X | Up To Date and Functioning | ||
Input Devices | |||
Microsoft USB Human Interface Device | Up To Date and Functioning | ||
Port Devices | |||
Prolific Prolific USB-to-Serial Bridge (COM6) | Up To Date and Functioning | ||
Monitors | |||
Sony Digital Flat Panel (1024x768) | Up To Date and Functioning | ||
Mobile Phones And Portable Devices | |||
Acer NOKIA | Up To Date and Functioning |
VAG KKL 409.1 Cable VCDS-Lite 1.2 Driver and Software Installation Guide
Vag Com 409.1 Drivers For Mac
SAFETY WARNING: Never start and run your engine inside of a closed garage. Always make sure there is good ventilation to prevent carbon monoxide poisoning. Carbon monoxide fumes are produced by your engine’s exhaust gases.
Compatible Product: VAG KKL 409.1 OBD2 USB Diagnostic Interface Cable
1. Go to www.obdinnovations.com/diagnostic-software and download the VCDS-Lite Software and the Drivers (CDM v2.08.30 WHQL Certified Windows Drivers)
2. Now plug the VAG-COM 409.1 USB cable into your PC. Windows will automatically detect the interface and attempt to find the correct drivers.
3. Extract and Open the “CDM 2.08.30 WHQL Certified for VAG 409.1” folder that you downloaded. Run the “CDM 2.08.30 WHQL Certified” installer to install the required Windows Drivers for the cable. (You may need to right click the installer and Run as Administrator).
4. After the driver installation is complete, we will need to setup the COM Port for the interface. Go to Control Panel > Device Manager and find the device under “Ports (COM & LPT). It should be called “USB Serial Port” and you will see the COM port number that was assigned to it. If the COM port number is 1, 2, 3 or 4, you will not need to configure the port. If it is not in the port range from 1-4, you will need to right click the “USB Serial Port” , then click “Properties”, then click the “Port Settings” tab, then click “Advanced”. Using the drop down menu, select a COM Port Number from 1-4. Click OK and OK to exit out.
5. Connect the VAG-COM 409.1 cable to your car’s OBDII diagnostic port and turn your key to the 2nd turn to turn on your ignition.
Vagcom 409.1 Driver
6. Run the VCDS-Lite-1.2-Installer that you downloaded to install the VCDS-Lite software.
7. Now you can start the VCDS-Lite 1.2 software from the Desktop shortcut icon. Click on Options. Under Select COM Port, choose the COM Port Number you selected prior in the Device Manager and click on Test. If the connection was successful, a box will pop up to let you know and you will be able to save the settings and begin using the software.
Copyright © 2014 CVO Electronics, Inc. All rights reserved. Commercial use and distribution of the contents of the website is prohibited without express written consent of the author.
409.1 Vagcom Software
Purchase the VAG KKL Cable here: http://www.obdinnovations.com/vag-com-kkl-obd2-usb-interface-cable-with-ftdi-ft232rl-chip/